Copyright Soundgear 2019
Check out the Soundgear Facebook page at www.facebook.com/soundgearuk
Soundgear Saturn Amplifiers

NEW!!! Saturn 16 (
4 x 4200W @ 4Ω) Price £900+VAT - (£1080)

Saturn 10 (
4 x 2500W @ 4Ω) Price £800+VAT - (£960)

Saturn 5 (4 x 1200W @4Ω) Price £570+VAT - (£684)

Please email sales@soundgear.co.uk to place an order



Soundgear presents Saturn.  A range of high quality class D amplifiers, featuring light-weight switch mode power supplies, modular design, rugged build quality and useful features such as VPL (Voltage Peak Limiting) for limiting maximum power output.

All amplifiers feature over sized high current switch mode power supply's and are suitable for driving sub/bass into 4 ohms loads on all 4 channels at once.

Shipped with 3pin UK mains plug on captive cable - can be replaced with EU plug, or high current Ceeform / Powercon (recommended for higher power applications)

3 models are available:
 
Input Channel Connectors 4 x Balanced female XLR
Output Channel Connectors 4 x Speakons
Output A:
Output B:
Output C:
Output D:

1+1- = CHA & 2+2- = CHB
1+1- = CHB
1+1- = CHC & 2+2- = CHD
1+1- = CHD
Input Impedance 20KΩ
Input Sensitivity 0.775V / 1.44V switchable
Input CMRR >80dB
Dynamic Range >112dB
Damping Factor >1000 @ 8Ω
THD <0.1% (20Hz-20kHz 1W)
Frequency  Response 20Hz34KHz,(+0/-0.3dB, 1W/8ohms)
Gain Control front gain control, from negative infinity to 0dB
Cooling variable speed fans, front to rear airflow
Protection Short circuit, Open circuit, DC, High temperature, RF, Ultra low frequency, Current peak limiter
Power Requirement AC voltage 180-240V 50-60Hz
Dimensions 88mmX490mmX438mm
Net weight 12.9 Kg
saturn5front
saturn10front
saturn16front
saturn10backjpg
Saturn 10
Saturn16jpg
Saturn 5 Saturn 10 Saturn 16
Channels 4 4 4
Output per channel 8Ω 600W 1250W 2100W
Output per channel 4Ω 1200W 2500W 4200W
Output per channel 2Ω (1) 2000W 4000W N/A
Max RMS output voltage (2) 71V RMS 103V RMS 132V RMS
Max peak output voltage (2) 100V Peak 146V Peak 187V Peak
Notes:
(1) 2Ω Operation is not recommended for low crest factor applications.
(2) Measured output voltage single channel into 4Ω resistive load with 4 second 1KHz sine wave.